phone_in_talk phone_in_talk
local_mall

Audison
APK 163
125W RMS 6.5" Component Speakers

$649.99
Audison APK 163
Audison APK 163

Overview

Specifications

Related

Overview

The Prima APK 163 features the AP 1 tweeter, AP 4 mid-bass and AP 6.5 woofer. The APK 163 system deserves special attention; the Audison designers developed a separate crossover dedicated to each speaker, simplifying OEM speaker replacement operation, negating the routing of additional cables through the door, which could void the car warranty. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.

AP 6.5 Woofer

  • 32 mm pure copper voice coil, for high power handling and outstanding low frequency control.
  • Water-repellent treated paper cone, featuring a profile developed with FEM (Finite element Method) simulation technology and optimized with the Klippel R&D Scan Vibrometer.
  • Reduced mounting depth, providing ease of installation in OEM placements.
  • TPU (thermoplastic polyurethane) edge, featuring the unique shallow “TripleWave” profile for maximum linearity of excursion.
  • Compact basket, protected by abrasion-resistant and scratch-proof coating, the motor affixed with damping epoxy adhesive.
  • High current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features temperature resistant plastic cover, protecting it against accidental short circuits.

AP 4 Midbass

  • AP4 midbass with extended frequency response, combined with high efficiency.
  • Water-repellent treated paper cone, featuring a profile developed with FEM (Finite element Method) simulation technology and optimized with the Klippel R&D Scan Vibrometer.
  • Reduced mounting depth, providing ease of installation in OEM placements.
  • Compact basket, protected by abrasion-resistant and scratch-proof coating, the motor affixed with damping epoxy adhesive.

AP 1 Tweeter

  • 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.
  • Acoustic lens designed to compensate for and fine tune the in-car frequency response anomalies in the 10kHz 13kHz bandwidth caused by restrictive OEM grilles in critical OEM placements.

APCX TW, APCX MD, APCX WF Crossovers

  • Dedicated crossovers for each component: APCX TW compact tweeter passive crossover optimized for OEM Integration featuring an attenuation switch (0 dB, +2dB) to tune the in-car response according to different installation conditions; APCX MD midbass crossover and APCX WF woofer crossover. The passive crossovers boast very reduced dimensions and are optimized for OEM Integration.

Specifications

General

Woofer Size
6.5"
165 mm
Tweeter Size
1.02"
26 mm
Woofer Voice Coil Diameter
1.26"
32 mm
Magnet Material Woofer
High Density Flux Ferrite
Cone Material Woofer
Water Repellent Pressed Paper
Dome Material Tweeter
Teloton Fiber
Power
125W RMS
Sensitivity
93.5 dB
Impedance
4Ω
Frequency Response
50 ÷ 20kHz
Crossover Woofer
Low Pass @ 600 Hz - 6 dB Oct.
Crossover Tweeter
High Pass @ 3,5 kHz - 6 dB Oct.
Woofer Weight
0.78 kg
Tweeter Weight
0.04 kg

Electric-Acoustic (Woofer)

SPL
89.5 dB
More Information
Brand Audison
RMS Power 125W RMS
Speaker Design 3-Way
Speaker Size 6.5"