Focal
FDP 6.900 V2
6-Channel Amplifier
$1,199.99
Overview
- Very Small Size for Power Output
- Can be used in 3, 4, 5 & 6 Channel Modes
- High-level Input, Compatible with OEM Stereo
- Remote Sub Control
- Invisible Mounting Bracket
- Highest Level of Crossover Flexibility
Details:
- RCA input can use a BTL source or common ground source. RCA switch select balanced floating ground or grounded to minimize noise.
- Each input has a peak limiter to prevent severe distortion and speaker damage. It allows light clipping
- Each channel has variable high pass crossover: 50 Hz to 4000 Hz, 12 dB Linkwitz-Riley
- Each channel has variable low pass crossover: 50 Hz to 4000 Hz, 12 dB Linkwitz-Riley
- Each channel has variable band pass crossover: 50 Hz to 4000 Hz, 12 dB Linkwitz-Riley
- Channels 5, 6 in bridged subwoofer mode , 24 dB Linkwitz-Riley Subwoofer remote volume control includes a clipping indicator light. Recommended DC voltage operating range 11.5 to 14.4 volts. Minimum DC voltage operating range 8 to 16 volts.
- Install an 80 AMP fuse at the battery
Compact Size
The FDP amplifiers are designed formaximal convenience to fit nearly anywhere while providing exceptional performance.
Specifications
Channels
6
Amplifier Class
D
Power
6 x 150W RMS @ 4Ω @ 1% THD
6 x 200W RMS @ 2Ω @ 1% THD
4 x 150W RMS into 4Ω + 1 x 500W RMS into 4Ω (Ch 5 + 6 Bridged) @ 1% THD
4 x 200W RMS into 2Ω + 1 x 500W RMS into 4Ω (Ch 5 + 6 Bridged) @ 1% THD
Frequency Response
5Hz – 25kHz
Signal/Noise Ratio
90 dB
Adjustable Gain
200mV to 10V
Slew Rate
13V / uS
Dimensions
2" x 14 3/8" x 7 3/4"
50 x 364 x 196mm
| Brand | Focal |
|---|---|
| Amplifier Class | Class D |
| RMS Power | 150W RMS |