Focal
FPX 5.1200
1200W RMS 5-Channel Amplifier
Overview
The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs.
To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to.
Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With its power and contained volume, FPX 5.1200 makes the installation easier in order to make the most of your boot space.
- Class D Amplifier
- Input Selector (2/4/6-Channels)
- Stable Under at 4 and 2 Ohms
- Adjustable Active Crossover for each Pair of Channels
- The FPX 5.1200 measures 13 1⁄4" x 6 4⁄5" x 2 1⁄4" (33.7 x 17.5 x 5.7 cm)
- Only One Amplifier for the Entire Hi-Fi Installation
- Easier to Integrate and Install
- Compact Design
- Substantial Power and Great Musicality
- Extremely Versatile
- A Dedicated Subwoofer Channel (+ Remote Control)
Optimized Heat Dissipation
For an amplifier to provide high power and musicality, efficiency and heat dissipation are two essential qualities. In order to optimise these aspects, FPX amplifiers have been given a thick aluminum chassis.
The distribution of the components on the motherboard was also carefully researched to optimise the cooling capacity of the chassis. The careful selection of each Class D component (switching power supply, oversized toroidal transformers and high-quality capacitors) has made it possible to create powerful but ultra-compact amplifiers offering excellent musicality.
Extremely Versatile
Thanks to its 4 x 70 Watts RMS at 4 Ohms and a Class AB amplifying technology the FPX 4.400 is an ideal solution for a wide range of uses.
In bridged mode, it delivers 2x200 Watts RMS at 4 Ohms, enabling it to power a significant subwoofer channel with channels 3 and 4. It is also stable at 2 Ohms (4 x 100 Watts RMS) so it can also be used for powering different types of speaker drivers. In order to perfectly power the speaker drivers, each pair of channels is equipped with an adjustable active crossover from 40 to 5000 Hz: high-pass, low-pass or wideband. The 2-/4-channel input modes ensure compatibility with mid-range head units only equipped with a pair output lines.
Specifications
| Brand | Focal |
|---|---|
| Amplifier Class | Class D |
| RMS Power | 1200W RMS |