Rockford Fosgate
HD14CVO-STG2
2014+ Harley-Davidson® CVO Stage-2 Kit
Overview
This complete kit includes a heatsink, bracket, hardware and wiring harness needed to install the M5-800X4 amplifier on select 2014 and newer Harley-Davidson® motorcycles. T-Harness allows for complete electrical integration without cutting or modifying factory wiring. Includes Boom!™ Audio bypass plugs for factory Harman Kardon® amplified systems and a Digital Signal Processor loop-thru for adding a DSR1 signal processor.
You must flash your factory radio to use this kit. Ready to flash? Here’s a list of dealers that can flash your radio.
Refer to the Fitment guide to verify compatibility before purchasing.
- Full Spec Cable - meets or exceeds AWG (American Wire Gauge) requirements
- Plug and Play design for easy installation
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- 90-degree harness included with amp install kit for Road Glide® installations
- Y-adaptors supports expansion of speakers in lower fairing, saddlebag, or Tour-Pak®
- Designed for use with 2014-Current Harley-Davidson® Motorcycles
- Designed for use with M5-800X4 amplifier (sold seperately)
- Designed for use with TM400X4ad amplifier
- Includes mounting brackets for Bat Wing and Shark Nose fairings
- T-harness supports front/rear fader (requires flash: "Rockford Fosgate 2014+ All Bikes")
- Includes Boom!™ Audio bypass plugs for factory Harmon/Kardon® amplified systems
- Factory Harley-Davidson® radio must be flashed to use this kit
CTA-2015
Rockford Fosgate cables conform to the CTA-2015 industry standard. The standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge size (8 AWG, 4 AWG, etc). Some manufacturers substitute thicker insulation for copper. With Rockford Fosgate, you get exactly what you pay for.
Power Wire
This amplifier kit includes power wire by including necessary cable for both B(+) and GND(-) connections. Additionally, amplifier kits include remote turn-on power wire. All cables in this kit conform to the CEA-2015 AWG specification.
Fused Distribution
This amplifier kit includes fused distribution. It utilizes a stand-alone fuse holder that can be installed in a convenient place under the hood.
Compatibility
Amplifiers
This amplifier installation kit is designed to interface only with the below aftermarket amplifier and Harley-Davidson® motorcycle.
Fitment
Harley-Davidson® Street Glide®
Installation on CVO™ and Screaming Eagle™ models are not plug-n-play and will require modification.
Harley-Davidson® Electra Glide®
Harley-Davidson® Tri Glide®
Harley-Davidson® CVO™
Harley-Davidson® Road Glide™
Specs
Specifications
Related
| Brand | Rockford Fosgate |
|---|