Rockford Fosgate
P1000X1bd
300W RMS Mono Amplifier

$499.99
Rockford Fosgate P1000X1bd
Rockford Fosgate P1000X1bd Rockford Fosgate P1000X1bd Rockford Fosgate P1000X1bd Rockford Fosgate P1000X1bd

Overview

The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers.

With its super efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.

  • 12dB/octave Butterworth Crossover
  • High level input capable with Auto Turn-On circuit
  • On-board Punch EQ with +18dB boost @ 45Hz
  • RCA Pass-Thru Outputs
  • Features C.L.E.A.N. Set-up
  • Optional Remote Punch Level Control (PLC2) ready (with input clip indicator)
  • Over Current Protection
  • Cast Aluminum Heatsink
  • Muted Turn On
  • Short Circuit Protection
  • Stealth Top Mounted Control Panel
  • Infrasonic Filter
  • 1 Year Warranty

CTA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).

Class-BD

Class-BD amplifiers have 75-80% efficiency ratings vs. 20-60% efficiency ratings of traditional Class-A/B amplifiers.

Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.

DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.

MEHSA³

MEHSA³ reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

C.L.E.A.N. Set-Up

C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to amp and optimize output.

Engineered in the USA

These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.

Specifications

Channels
Mono
Power
1000W RMS
300W x 1 @ 4Ω
500W x 1 @ 2Ω
1000W x 1 @ 1Ω
Dynamic Power
491W x 1 @ 4Ω
874W x 1 @ 2Ω
1430W x 1 @ 1Ω
Frequency Response
20Hz to 250Hz +/- 1.0dB
Input Sensitivity
150 mV - 12 V
Circuit Topology Class
Class BD
Efficiency
86% @ 4Ω
Total Harmonic Distortion
4Ω: <1.0%
2Ω: <1.0%
1Ω: <1.0%
Signal Input
Hi/Low Level: 1 RCA Pair
Signal Output
Hi/Low Level: 1 RCA Pair
Tone Controls
Punch EQ2 Bass: 0dB to +18dB @ 45Hz
Crossover Controls
Low-Pass (LP): 50 - 250Hz @ 12dB/Octave Butterworth
Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth
All-Pass: No
Remote Controls
Optional Punch Level Control (PLC2) Ready
Power Wire Gauge
4 AWG
Power Input Connector
Captive C-Clamp
Speaker Wire Gauge
8 AWG to 18 AWG
Speaker Output Connector
Captive C-Clamp
Cooling
Convection
Operating Voltage
9 - 16 VDC
Recommended Fuse
140 A
Average Current Draw
65 A
Max. Current Draw
130 A
Suggested Alternator
100 A
Dimensions
2.38" x 7.76" x 13.28"
605 x 197 x 337mm
Weight
12.9 lbs (5.85 kg)
More Information
Brand Rockford Fosgate
Amplifier Class Class BD
RMS Power 300W RMS
RMS Power at 4 Ohms 300W RMS x 1 @ 4 Ohms