phone_in_talk phone_in_talk
local_mall

Rockford Fosgate
P1000X2
300W RMS 2-Channel Amplifier

$499.99
Rockford Fosgate P1000X2
Rockford Fosgate P1000X2 Rockford Fosgate P1000X2 Rockford Fosgate P1000X2 Rockford Fosgate P1000X2

Overview

Details

Specs

Overview

The Punch P1000X2 is a 2-channel stereo amplifier capable of producing 500 Watts into each channel at 2-Ohms. The P1000X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.

The P1000X2 is an excellent way to PUNCH up your sound system without monopolizing your entire trunk - that way you have more room for subs! With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Remember to utilize the recommended power and speaker cables to optimize power delivery.

  • 12dB/octave Butterworth crossover
  • Features C.L.E.A.N. Set-up
  • High level input capable with Auto Turn-On circuit
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • RCA pass-thru outputs
  • Short circuit protection
  • Over current protection
  • Cast aluminum heatsink
  • Muted turn on
  • Stealth top mounted control panel
  • 1 Year Warranty

CTA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).

TRANS•ana

Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.

Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.

DTM

Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.

DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

MEHSA³

MEHSA³ reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.

C.L.E.A.N. Set-Up

C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to amp and optimize output.

Engineered in the USA

These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.

Specifications

Channels
2
Power
1000W RMS
300W x 2 @ 4Ω
500W x 2 @ 2Ω
1000W x 1 @ 4Ω Bridged
Dynamic Power
401W x 2 @ 4Ω 0° Res
656W x 2 @ 2Ω 0° Res
Frequency Response
20Hz - 20kHz +/- 1.0dB
Input Sensitivity
150 mV - 12 V
Circuit Topology Class
Class A/B
Efficiency
69% @ 4Ω
Total Harmonic Distortion
4Ω: <1.0%
2Ω: <1.0%
Signal Input
High/Low Level: 1 RCA Pair
Signal Output
Low Level: 1 RCA Pair
Tone Controls
Punch EQ2 Bass: 0dB to +18dB @ 45kHz
Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Function depends upon LP/AP/HP switch position
Crossover Controls
High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave Butterworth
Remote Controls
Optional Punch Level Control (PLC2) Ready
Power Wire Gauge
4 AWG
Power Input Connector
Captive C-Clamp
Speaker Wire Gauge
8 AWG to 18 AWG
Speaker Output Connector
Captive C-Clamp
Cooling
Convection
Operating Voltage
9 - 16 VDC
Recommended Fuse
140 A
Average Current Draw
70 A
Max. Current Draw
140 A
Suggested Alternator
100 A
Dimensions
2.38" x 7.76" x 15.03"
605 x 197 x 382mm
Weight
15 lbs (6.8 kg)
More Information
Brand Rockford Fosgate
Amplifier Class Class AB
RMS Power 300W RMS