Rockford Fosgate
R2-200X2
200W 2-Channel Amplifier

$219.99
Rockford Fosgate R2-200X2
Rockford Fosgate R2-200X2 Rockford Fosgate R2-200X2 Rockford Fosgate R2-200X2 Rockford Fosgate R2-200X2

Overview

Primed for Performance, the R2-200X2 is a 200 watt, full-range Class-D amplifier capable of operating at 4Ω or 2Ω stereo and 4Ω bridged/mono. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases.

The R2 models are developed for car audio fanatics that want a reliable amplifier – with all the power and performance you’ve come to expect from Rockford Fosgate – at an economical price. Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. These 3rd generation of Prime Series amplifiers are refined with the latest Rockford Fosgate technology for easy setup and configuration, making them perfect for use with factory audio or custom aftermarket systems.

  • Balanced Differential Inputs with RCA Pass Through Outputs
  • Variable Input Gain adjustment level
  • Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
  • High Level Input Capable
  • Features C.L.E.A.N. Set-up
  • Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
  • Short Circuit & Over Current Protection
  • Top Mounted Control Panel
  • Cast aluminum heat sink
  • CEA-2006 Compliant & CE Compliant
  • Full Range Class-D
  • 1 Year Warranty

CTA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).

Full Range Class-D

A full-range version of the Class-D topology which is a high efficiency amplifier design that reduces current consumption from the charging system.

P.O.W.E.R.

Power supply circuit design that allows the amplifier to increase output power as voltage increases.

C.L.E.A.N.

C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to amp and optimize output.

Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.

MEHSA⁴

MEHSA⁴ reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.

Specifications

Channels
2
Power
200W RMS
50W x 2 @ 4Ω
100W x 2 @ 2Ω
200W x 1 @ 4Ω Bridged/Mono
Dynamic Power
60W x 2 @ 4Ω
107W x 2 @ 2Ω
215W x 1 @ 4Ω Bridged/Mono
Frequency Response
20Hz to 20kHz
Input Sensitivity
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V
Circuit Topology Class
Class D
Efficiency
Total Harmonic Distortion
4Ω: <1.0%
2Ω: <1.0%
Signal Input
Low-Level: 2 RCA
High-Level: 4-Pin Molex
Signal Output
Low-Level: 2 RCA (Pass-Thru Active with RCA or Hi-Level Input)
Tone Controls
No
Crossover Controls
High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
All-Pass: Yes
Remote Controls
No
Power Wire Gauge
4 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Compression Terminal Block
Cooling
Convection
Operating Voltage
9 - 16 VDC
Recommended Fuse
30 A
Average Current Draw
Max. Current Draw
18 A
Suggested Alternator
Dimensions
1.9" x 6.8" x 8.1"
490 x 173 x 205mm
Weight
More Information
Brand Rockford Fosgate
Amplifier Class Class D
RMS Power per Channel at 2 Ohms 100W RMS x 2 @ 2 Ohms