Rockford Fosgate
RFK1D
Amplifier Kit
Overview
Kit includes 17 feet of 1/0 AWG power wire, 3 feet of ground wire, ANL/Maxi fuse holder and fuse, 20 feet of remote wire, 100 Amp fuse.
- 17 Feet of 1/0 AWG Power Wire
- 3 Feet of 1/0 AWG Ground Wire
- 4 Feet of 4 AWG Power Wire
- 4 Feet of 4 AWG Ground Wire
- ANL/MAXI Fuse Holder and Fuse
- 30 Feet of 16 AWG Speaker Wire
- (3) 16 Feet Twisted Pair RCAs
- (2) 4 AWG Distribution Block
- 20 Feet of Remote Wire
- 300 Amp Fuse
- 1/0 AWG (53.5mm²) 4,704 Strands
- 16 AWG (1.31mm²) 65 Strands
- 4 AWG (21.1mm²) 1,862 Strands
- Includes Appropriate Wire Termination Hardware
- Full Spec Cable - Meets or Exceeds AWG (American Wire Gauge) Requirements
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- 1 Year Warranty
CTA-2015
Rockford Fosgate cables conform to the CTA-2015 industry standard. The standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge size (8 AWG, 4 AWG, etc). Some manufacturers substitute thicker insulation for copper. With Rockford Fosgate, you get exactly what you pay for.
Power Wire
This amplifier kit includes power wire by including necessary cable for both B(+) and GND(-) connections. Additionally, amplifier kits include remote turn-on power wire. All cables in this kit conform to the CEA-2015 AWG specification.
Dual Amp Installation
This amplifier kit is designed to install two amps in one system. This includes all necessary cables for proper connection; power, ground, turn-on and RCA signal. All cables in this kit conform to the CEA-2015 AWG specification.
Speaker Wire
This amplifier kit includes speaker wire. These cables connect the amplifier to the speakers. All wires in this kit conform to the CEA-2015 AWG specification.
RCA Cables
This amplifier kit includes RCA patch cables. These are the necessary cables used to transfer low-level signal from the source unit to the amplifier, typically located in the rear of the vehicle.
Fused Distribution
This amplifier kit includes fused distribution. It utilizes a stand-alone fuse holder that can be installed in a convenient place under the hood.
Engineered in the USA
These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
Specifications
Brand | Rockford Fosgate |
---|